New flashing
Fresh flashing goes in at every penetration matched to the new roof.
Replacing a cedar roof in Bloomingdale starts with removing every old shake and strip of felt interlay, then fixing the boards underneath before the new roof goes on, with the deck matched to whatever comes next. Call (862) 356-0010 to reach a local roofer.
Every cedar roof eventually wears past what spot repairs can fix. After decades of weather, shakes lose thickness, split easily and no longer hold a nail, so new pieces have nothing solid to tie into. That is when replacing the roof costs less over time than chasing leaks.
A wood roof cannot be covered over. The surface is too irregular to support new material flat, the old wood traps moisture and building codes typically require removal. Removing everything is the only way to inspect the deck.
What sits under the shakes shapes the whole project. Spaced 1x boards suit cedar, but other roofing needs solid plywood or OSB, either laid over the boards or installed after they come out. Rotted boards are replaced either way.
Many cedar shake roof replacement calls in Bloomingdale also turn up a need for cedar shake roof installation or cedar shake roof repair.
Dealing with this in Bloomingdale, NJ right now? Call (862) 356-0010 and describe the problem to a roofer who works in Bloomingdale.
Call nowOld wood roofs produce a lot of debris and some surprises.
Before any tear-off, you decide what goes back on, since that choice decides whether the deck needs solid sheathing. Code and permit requirements are confirmed before work starts.
The crew protects landscaping, siding and windows and sets a dumpster close to the house. Cover stored items in the attic, because old wood roofs shed dust inward.
The crew removes the shakes, interlay, flashing and ridge caps, clearing the deck completely. Sometimes a forgotten layer of shingles turns up and is removed as well.
Damaged boards are cut out, and the deck is sheathed solid for asphalt, metal or most synthetic products. A sound deck is what the new fasteners rely on.
The deck is dried in with an eave membrane, underlayment and new edge metal. For new cedar, a breathable mat or spaced boards keep air moving under the shakes.
The finish roof is laid with new metal at valleys and walls and a vented ridge. The site is cleaned and swept with magnets before the crew leaves.
Fresh flashing goes in at every penetration matched to the new roof.
Ice and water membrane goes in at the eaves and valleys under the new roof.
Rotted boards are replaced and solid sheathing is added if needed before anything new goes on.
Debris is removed daily and stray nails are collected.
All shakes, felt and old metal are stripped section by section.
Cedar shingle roof replacement is common on older homes, where sawn shingles were the standard roof long before asphalt. Many were built on open board decks, and some were roofed over decades ago, which means two layers to remove. With everything removed, the boards are checked and repaired or covered with solid sheathing.
New cedar shingles restore the tailored, historic appearance many owners want to keep. Local design rules may limit what can replace a historic wood roof. For a Bloomingdale home, the choice depends on the house, the budget and local guidelines.
Cedar roofs around Bloomingdale reach replacement age on older homes first, often after years of shade and moss. For homes in Bloomingdale and nearby places including Wanaque, Butler, Riverdale and Pompton Lakes, storms and age decide the timing, and the house style decides the material, which is worth talking through before any work begins.
Searching for cedar shake roof replacement near me from Bloomingdale or Wanaque, Butler, Riverdale and Pompton Lakes? Call (862) 356-0010 to talk to a roofer who works in your part of town.
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Bloomingdale, NJ have the roof checked in the fall and again after the snow melts.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers in Bloomingdale know the roof types and weather wear common in local homes.
Ask your questions before you agree to anything.
More questions? Call (862) 356-0010
Installing cedar shakes or shingles with proper exposure, valleys, ridge caps and ventilation, so the wood can dry and last for decades.
Learn moreReplacing split, cupped or missing shakes, clearing moss and fixing valleys and ridge caps, without tearing off the shakes that still have years left.
Learn moreFull tear-off and replacement for roofs that are worn out, storm beaten or leaking in several places, with the old layers removed and the deck checked.
Learn moreFull shingle roof replacement, from tear-off and deck repair to new shingles and flashing, including permits, cleanup and a final check.
Learn moreLooking for something else?
See all roofing servicesCall (862) 356-0010 for a local roofer in Bloomingdale and nearby towns.