Moisture check
A sample cut through the old layers before the new roof is planned.
Flat Roofing
TPO Roofing Bloomingdale, NJ
A roofer in Bloomingdale can install a TPO roof on a flat or low-slope section of a home or building, giving a reflective, watertight surface that stays cooler than old tar or rolled roofing. Dial (862) 356-0010 to talk through a TPO roof with a local roofer.
A TPO roof is a single sheet of thermoplastic membrane, usually white, laid over rigid insulation on a low-slope deck. Rolls come in several widths and thicknesses, with 60 mil a common middle choice and 80 mil used where the roof sees more wear. Its seams are welded with hot air, so the overlap becomes part of the sheet rather than a glued joint that can let go.
A TPO roof rarely fails in the middle of a sheet; it fails at the edges, seams and penetrations. Leaks come from under-welded seams, flashing that pulls away at walls and curbs, and penetrations sealed with caulk instead of proper boots. Tapered insulation and crickets that move water to the drains or scuppers keep the membrane from sitting under standing water.
Many tpo roofing calls in Bloomingdale also turn up a need for tpo roof repair or flat roof installation.
Dealing with this in Bloomingdale, NJ right now? Call (862) 356-0010 to talk to a local roofer.
Call nowThe process
What a TPO roof job involves
A TPO roof is built in layers, and each one has a job.
Check the existing roof
The roofer walks the roof, checks for soft decking and often takes a core cut to see how many layers are there and whether the insulation is wet. Codes generally allow no more than two roof systems, so a roof that already has two must be torn off.
Prepare the substrate
Old roofing is removed where needed, damaged decking is replaced and the surface is cleaned and made smooth. Where the old roof stays, a recovery board goes down first so the TPO does not ride on gravel or blisters.
Install insulation boards
Insulation boards are laid in staggered layers, with tapered sections built to move water off flat spots. This layer also brings the roof up to the insulation level current codes expect.
Attach the membrane
The membrane is fastened at the laps or fully adhered, depending on the deck, the wind exposure and the design. The roofer picks the method based on wind exposure, deck type and whether adhesive odors would bother the people inside.
Fuse the laps
A robotic hot-air welder runs the long seams and a hand welder does corners and details, fusing the overlapping sheets together. The finished seams are probed by hand so any gap is rewelded before the job is done.
Seal the penetrations
Penetrations get molded boots or field-built flashing, curbs are wrapped and walls are flashed up and capped. Drains get new clamping rings, and the roof edge gets metal the membrane can be welded to.
What is included
What goes into a TPO roof
Insulation boards
New insulation boards sized for the energy code so water moves off instead of ponding.
Welded membrane
TPO sheets fastened or adhered to the insulation so the roof acts as one continuous sheet.
Perimeter metal
New drip edge, coping or gravel stop at the roof edge with new drain rings where needed.
Penetration flashing
Molded boots on pipes and wrapped curbs under equipment so leaks do not start at the details.
Related service
TPO Roof Installation Bloomingdale, NJ
For a brand new low-slope roof, the important decisions come before the first roll is opened. Drain or scupper locations, tapered insulation and the attachment method are worked out up front so the finished roof drains on its own.
Residential TPO installation in Bloomingdale tends to mean smaller roofs: additions, carports, dormers with little pitch and flat sections behind a parapet. Shingles need a minimum pitch to shed water, so these low sections need a membrane. The tricky part is the tie-in to the shingled roof, which has to be lapped so water flows over the TPO.
Related service
TPO Roof Replacement Bloomingdale, NJ
TPO roof replacement means taking an aging membrane or old flat roof down to a sound base and putting a new TPO system on top. A moisture scan, often with an infrared camera, shows how much of the insulation is wet and has to come out. Leaving wet boards under a new roof traps the water and causes blisters and rot later.
A single dry existing roof can sometimes stay in place under the new membrane. Once a building already has two roof systems, the next roof has to start from the deck.
Related service
PVC Roofing Bloomingdale, NJ
PVC membrane looks and installs much like TPO, with the same hot-air welded seams and many of the same flashing details. The difference is in the chemistry: PVC holds up better to grease, oils and many chemicals, which is why it is a common pick for restaurants and buildings with kitchen exhaust on the roof.
PVC and TPO cannot be welded to each other, so repairs and additions have to match the existing membrane. In Bloomingdale, the choice usually comes down to what the roof is exposed to, with PVC for grease and chemicals and TPO for most other low-slope roofs.
Local help
TPO Roofing Near Me
Around Bloomingdale, TPO goes on everything from shopping centers to the flat roof over a back porch: low-slope additions, porches, garages and row homes use it as often as offices and stores do. Across Bloomingdale and nearby towns like Wanaque, Butler, Riverdale and Pompton Lakes, older roofs often have one or two layers already in place, which is why the core cut and tear-off decision matter so much, so it pays to plan the drainage and the details as carefully as the membrane itself.
For tpo roofing in Bloomingdale, NJ or nearby towns like Wanaque, Butler, Riverdale and Pompton Lakes, call (862) 356-0010 to reach a roofer who covers your street.
What the local climate does to a roof
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Bloomingdale, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Smaller repairs
Small roof problems caught early usually stay small repairs.
Familiar with local homes
Roofers in Bloomingdale know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
TPO Roofing FAQ
Do I have to tear off my old flat roof for TPO?
The existing layers and their condition decide. If there is only one existing roof and the insulation is dry, a recover with a cover board is often allowed. With two layers already in place or trapped moisture, a tear-off is the right call.
Can TPO be used on a home?
On homes, TPO is a strong choice wherever the pitch is too low for shingles. It is not meant for steep roofs, where shingles or metal are the better fit. Careful flashing at walls and shingle transitions is what makes it last on a home.
Why are TPO roofs white?
White TPO bounces much of the summer sun back off the roof. A cooler roof surface means less heat moving into the building, which can lower air conditioning demand. A clean surface reflects best.
How long does a TPO roof last?
A well-installed TPO roof commonly lasts somewhere around 15 to 30 years. Thicker membrane, good drainage and limited foot traffic push it toward the long end.
Is TPO better than EPDM?
Each has its strengths. TPO is white and reflective with heat-welded seams, while EPDM is a black rubber sheet whose seams are joined with tape or adhesive. Welded seams give TPO an edge at the laps, and EPDM is valued for its flexibility and simple repairs.
More questions? Call (862) 356-0010
Other services that may help
TPO Roof Repair
Repairs for open seams, punctures, failed flashings and wet spots on TPO roofs, so the roof stays one continuous sheet.
Learn moreFlat Roof Installation
Installing TPO, PVC, EPDM or modified bitumen roofs on additions, garages, porches and flat-roof homes, with every wall, curb and penetration flashed properly.
Learn moreCommercial Roofing
Roofing work for business, institutional and multi-family buildings, planned around tenants and business hours.
Learn moreRubber Roof Installation
EPDM rubber roof installation with the right thickness, attachment method and flashing details, so the roof stays flexible and watertight for decades.
Learn more
Looking for something else?
See all roofing servicesTalk to a Bloomingdale roofer about tpo roofing
Call now for Bloomingdale tpo roofing and help in the towns around it.